重袋噸袋包裝機組

適用范圍Scope of application

針對于化工行業的顆粒噸袋定量包裝。

For the chemical industry particle ton bag quantitative packaging.

功能特點Funcational characteristics

1、稱重部分：稱量采用四傳感器模塊并聯方式，機械穩定性增強,提高稱量精度和抗干擾能力;采用梅特勒·托利多傳感器模塊，確保稱重四角平衡，模塊式方便安裝拆卸更換等；大大優化稱重及維護的可靠性和方便性。

Weighing part:The weighing adopts the parallel mode of four sensor modules,which enhances the mechanical stability,improves the weighing precision and anti-interference ability;Mettler Toli multi-sensor module is used to ensure the balance of the weighing four comers,and the modular type is easy to install,disassemble and replace, Greatly optimize the reliability and convenience ofweighing and maintenance.

2、自動脫鉤及自動夾袋松袋口機構：人工將噸袋四角掛在自動脫鉤機構上，再將袋口套入中間夾袋機構，人工撥動開關,夾袋機構自動夾住袋口。當稱重卸料完成,顛實動作完成(顛實動作可設置次數)，氣動升降機構將滿袋下降至托盤上，氣缸驅動掛鉤以及自動松袋口，氣動升降機構上升脫離噸袋，此時設備綠燈報警提醒叉車人員過來叉取。

Automatic decoupling and automatic bag opening mechanism:Manually hang the four comers of the ton bag on the automatic decoupling mechanism, and then put the bag mouth into the middle bag clamping mechanism, manually flip the switch, and the bag clamping mechanism automatically clips the bag mouth.When the weighing and unloading is completed and the toppling action is completed (the number of toppling action can be set), the pneumatic lifting mechanism will lower the full bag to the tray, the cylinder will drive the hook and automatically loosen the bag mouth, the pneumatic lifting mechanism will rise out of the ton bag,and the equipment green light alarm will remind the forklift personnel to come and pick up.

3、氣動升降噸袋顛實機構:噸袋灌裝過程中采用氣動升降方式顛實。

Pneumatic lifting ton bag toppling mechanism:The pneumatic lifting method is adopted in the filling process.

4、友好的人機界面:采用最先進的稱重模塊配合觸摸屏式界面，人員操作更直觀更簡單。

Friendly man-machine interface:With the most advanced weighing module and touch screen interface, personnel operation is more intuitive and simple.

5、預供料式供料機構:采用供料器預供料方式，使設備確保精度的前提下,最大限度的提高粗供料的速度，大大提高設備稱重效率。組合氣缸設計，采用組合氣缸驅動喂料,解決喂料機構故障多、性能不穩定等諸多難題。

Pre-feed feeding mechanism:The pre-feeding mode of the feeder is adopted to maximize the coarse feeding speed and greatly improve the weighing efficiency of the equipment under the premise of ensuring the accuracy of the equipment.Combined cylinder design,the use of combined cylinders to drive the feed, to solve the feeding mechanism failures, unstable performance and many other problems.

6、整機實現自動夾袋,灌裝完成自動松袋、自動脫鉤。

Dynamic automatic recheck correction function, the weight is not allowed to exceed the alarm.

7、動態自動復檢修正功能,重量不準超差報警。

The whole machine realizes automatic bag clamping,automatic bag loosening and automatic decoupling after filling..

技術參數Technical parameters

1、型號：PUD-MTO1

Model：PUD-MTO1

2、稱量范圍(kg)：500-1000

Weighing range (kg)：500-1000

3、顯示分度值(kg)：0.1

Display index value (kg)：0.1

3、稱量誤差：±500g

Weighing error：±500g

5、稱量速度(bag/h)：5-15(由來料速度決定)

Weighing speed (bag/h)：5-15(Determined by the incoming material speed)

6、工作環境供電：相對濕度≤90%,4N-AC380V 50Hz

Working environment power supply：relative humidity≤90%,4N-AC380V 50Hz

7、耗電耗氣：0.4-0.6Mpa壓縮空氣3m/h

Power & gas consumption：0.4-0.6Mpa compressed air 3m/h

-取決于包裝物料的具體特性和包裝規格。

Depend on the specific characteristics of packaging materials and packaging specifications